Reference Motorized Specs
Setting limits and controlling the operation of the SI Reference Motorized only takes seconds thanks to Somfys ILT2 technology coupled with the SI Referenced Motorized Control Board. Controls included in the box (at no extra charge) are: 12 volt Trigger, IR Remote / Receiving Eye, and Wall Switch. RS232 & RF are available options, both of which are compatible with all common control systems. SI’s Referenced Motorized mounting brackets give installers the flexibility to mount on-wall, on-ceiling, in-ceiling-top-mount, and in-ceiling-side-mount. This design allows for incremental adjustment both vertically and horizontally after the screen is mounted.Reference Motorized is available up to 200” with all SI HD screen materials, including the Gamma HD, Solar HD, Lunar HD, Gamma Maestro HD, and Lunar Maestro HD. Custom screen sizes are available in one inch increments and the unit comes standard with a 24 inch black screen drop (up to six feet with custom orders).
SI Reference Motorized eliminates the need for an independent flush mount chassis. Some manufacturers require a separate chassis to put the box in, which is both costly and impractical. With SI Reference Motorized, the installer can either add flush mount plates at the bottom or add the décor plate for external installation. Pricing is the same for in-ceiling or on-ceiling / on-wall—simply specify type desired when order is placed.
Screen Orientation Options (click to enlarge) |
Motorized Screen Mounting Brackets
|
Controls Note: all controls are intelligent and can be plugged into any RJ45 jack. 12 Volt trigger is the only exception and utilizes a 3.5mm stereo jack.
- IR Extender & Remote (included)
- 12 Volt Trigger (included)
- ilt-wall-switch
- ILT RS485/RS232
- RTS RF Receiver-ILT Motor
Support Documents
- IR Hex Codes (Somfy ILT Motor with IRT 103 Remote)
- Screen Orientation Diagram
- Reference Motorized G3 Installation Instructions
- Somfy Documentation
















