Connect not working (no power LED)

Connect not working (no power LED)

    Possible Cause:

  • DC power.

    Solution:

  • Ensure the Connect is powered using the included power supply. Connect requires at least 12 volts DC to operate. When powered, a blue LED on the front of the unit will turn on.

    Possible Cause:

  • The control inputs are not configured properly.

    Solution:

  • Refer to the following options below for the corresponding control method used.

  • If these solutions have not corrected your cause and or it was not listed here please contact SI customer support at 512-832-6939 and we will be happy to assist you.
2018-05-02T18:29:46+00:00May 2nd, 2018|Connect|0 Comments
Left Menu Icon
Right Menu Icon