Connect power LED on, but still not working (no Infrared Control)

Connect power LED on, but still not working (no Infrared Control)

    Possible Cause:

  • Infrared not being received by Connect built-in IR window or remote connect IR eye.

    Solution:

  • Ensure the SI IR Remote is pointed at the connect box built in receiver (which is located to the left of the power indicator (when you are facing it).  The SI IR Remote Infrared transmitter in the top front of the remote must be in line-of-sight to the built-in IR receiver to work properly.

    Possible Cause:

  • If using the remote IR input and the Infrared not being received by the remote connect IR eye.

    Solution:

  • Ensure the SI IR Remote is pointed at the remote IR eye receiver.  The SI IR Remote Infrared transmitter in the top front of the remote must be in line-of-sight to the remote IR eye receiver to work properly.

    Possible Cause:

  • Remote Battery depleted.

    Solution:

  • Replace battery (1) CR2025 3V Li.
2018-05-02T18:32:46+00:00May 2nd, 2018|Connect|0 Comments
Left Menu Icon
Right Menu Icon