Motor moving in reverse

Motor moving in reverse

    Possible Cause:

  • Motor polarity reversed.


  • Disconnect power. Pull down the PCB tray. Unplug the white data cable connected to the Somfy input on the board. Plug the data cable directly into the back of the Somfy wall switch. Move the dip switch toggle on the back of the wall switch into the down position. Press and hold the stop button for 5 seconds and then release. Polority should then reverse. Move dipswitch back into the center position.
2018-05-03T18:26:31+00:00May 3rd, 2018|Zero-G|0 Comments

Leave A Comment

Left Menu Icon
Right Menu Icon