Factory Resetting the motor will erase all limits and paired remotes. #
To Factory Reset the motor:
Push and hold the Programming button on the motor head until the screen/shade jogs three times.
To pair a remote to the motor: #
Push and hold the Programming Button on the motor head until the screen/shade jogs once.
Briefly tap the Programming Button on the back of the remote, the screen/shade will jog to confirm.
If using a multi-channel remote, select the channel first before tapping the Programming Button on the remote
Adjusting Limits: #
Move the shade to the current limit you want to adjust.
Push and HOLD the UP and DOWN buttons together until the shade jogs once.
Move the shade to the desired new limit.
Push and HOLD the STOP/MY button until the shade jogs once to save the new limit.
Setting new Limits: #
Use the UP and DOWN buttons to move the screen to the desired upper limit.
Hold STOP/MY and DOWN until the screen begins to move down. Press to STOP the screen near the desired lower limit.
Fine tune the lower limit using the UP and DOWN Buttons.
Hold the STOP/MY and UP until the screen starts moving up.
Stop the screen by briefly pressing the STOP/MY button. Save the limits by holding until the STOP/MY button until motor jogs once.
Save the remote by briefly pressing the Programming Button on the back of the remote. The screen will jog once.
The screen is now in “run” mode. A momentary press of UP or DOWN will move the screen to the upper or lower limit respectively. Use to STOP/MY the screen at any time.
Reversing Motor Direction: #
Move the shade so it is NOT at an upper or lower limit or MY/Favorite position.
Push and HOLD the UP and DOWN buttons together until the motor jogs.
Push and HOLD the MY/STOP button until the motor jogs.
Test and confirm the motor direction has changed.
