Nano Troubleshooting
Nano: Fabric Roll Over & Hem Bar Jam Troubleshooting – Indoor Shades
Last Updated: July 28, 2026Applies To: Nano (V1 & V2), Niño Indoor Shades What Is Fabric Roll Over? Fabric roll over happens when the shade material rolls unevenly, often walking to one side or bunching. This can cause: Telescoping: fabric tracks left or right instead of rolling straight Wrinkles or creases in the fabric The ...
Nano: How to fix pin holes in Blackout Material
Last Updated: July 28, 2026Quick Field Fix: Using White-Out to Repair Pinholes in Blackout Fabric Overview Pinholes in blackout or backout fabric can compromise the light-blocking performance and create visible light leaks, especially in projection environments or shaded rooms. When replacement isn't an option and time is tig...
Nano: How to Swap the Motor in a Nano V2 Shade (Indoor)
Last Updated: July 28, 2026This article shows how to easily swap the motor in your Nano V2 indoor shade. Watch the Video Before You Start Make sure the shade is fully raised . Disconnect power or unplug the motor if needed. Grab a Phillips screwdriver--maybe a flathead too for prying. Step-by-Step Instructions Remove the front...
Nano: Updating Charging Magnet for Open Roll Shades – V2 Motor Upgrade
Last Updated: July 28, 2026When replacing an older V1 motor in an Open Roll shade with a new V2 motor (with a plug-style charging port), the internal charging magnet must also be replaced. Follow the steps below to ensure proper charging functionality. Tools Required Phillips screwdriver 0.5mm Allen wrench (for charging magne...
Nano: V1 Box Motor Replacement
Last Updated: July 28, 2026🔧 Tools Required Phillips screwdriver Flathead screwdriver or trim tool (optional) Clean, padded work surface Replacement motor (Nano-compatible) Remote (for programming/testing) Charger (if rechargeable motor) Step-by-Step Instructions 1. Remove the Shade from the Brackets Locate the manual levers ...
