Niño
Niño Box, Roman, Sheer & Zebra Shades: Install and Setup Guide
Last Updated: July 28, 2026Installation Foam & Bracket Removal Ensure all shipping foam is removed from both the motor head side and the idler side of the shade. Remove brackets from the shades as shown. Outside / Inside Mount The brackets will come attached to the shade. Determine whether your window shades will be outside o...
Niño Cellular Shades: Install and Setup Guide
Last Updated: July 28, 2026Mounting the Brackets The brackets will come attached to the shade. Reference the sticker "Location for Mounting Bracket" for bracket placement. (additional support at these locations) Measure the location of the brackets at the sticker location on the shade. Install the brackets +/- 1.5" from the s...
Niño Duo’s: Install and Setup Guide
Last Updated: July 28, 2026Installation Foam & Bracket Removal Ensure all shipping foam is removed from both the motor head side and the idler side of the shade. Remove brackets from the shades as shown. Outside / Inside Mount Determine whether your window shades will be outside or inside mount, and follow the corresponding s...
Niño Open Roll: Install and Setup Guide
Last Updated: July 28, 2026Installation Foam & Bracket Removal Ensure all shipping foam is removed from both the motor head side and the idler side of the shade. Remove brackets from the shades as shown. Outside / Inside Mount Determine whether your window shades will be outside or inside mount, and follow the corresponding s...
Niño Trapezoidal Cellular Shades: Install and Setup Guide
Last Updated: July 28, 2026Mounting the Brackets The brackets will come attached to the shade. Reference the sticker "Location for Mounting Bracket" for bracket placement. (additional support at these locations) Measure the location of the brackets at the sticker location on the shade. Install the brackets on the window frame...
Niño Woven Woods: Install and Setup Guide
Last Updated: July 28, 2026The brackets will come attached to the shade. Top Mount: If you opt for inside mount your window frame should have a depth of at least 3" to attach the brackets at the top of the window frame Mounting the Brackets Before installing the shade, it is necessary to install the brackets to the shade and ...
Niño: Adding your Niño shades to Smart Things (Zigbee)
Last Updated: July 28, 2026Niño: Adding your Niño Shades to the SI Eco-System
Last Updated: July 28, 2026Make sure your Zigbee network is established in TRO.Y and all necessary Zigbee Routers are connected In the TRO.Y GUI: Select the INTEGRATION TABLE Next, select the DEVICE TABLE Next, press the OPEN ZIGBEE PAIRING button Make sure the shade the shade is Awake buy pressing and holding the Motor Head ...
Niño: Control 4 Direct SI IP Motor Driver
Last Updated: July 28, 2026This driver enables you to control a Shade Innovations (SI) IP motor from Control4. OS 2.9.0 or higher is required, although AUTO-ADD Motor Drivers requires OS 4.0.0 or higher. The driver also includes an innovative Limit Setup Mode , which can be used from the Control4 App (iOS/Android) or a Touchs...
Niño: Demo Stand Instructions
Last Updated: July 28, 2026Niño: Direct Control 4 Zigbee Integration
Last Updated: July 28, 2026This driver enables you to control a Shade Innovations ZigBee motor from Control4 . OS 2.9.0 or higher is required. The Control 4 Zigbee Pro Network must be setup prior, not currently available in Control 4's Zigbee 3.0 mode. Perform the initial configuration (confirm/reverse direction and set upper...
Niño: How to add a Niño shade to Bond (RF only)
Last Updated: July 28, 2026From the devices tab, press the + button in the top right corner of the screen Under Devices, select the Shades, Roofs, Screens & Awnings button Click the Show All to open the list, scroll down and select Screen Innovations Niño This list is NOT in alphabetical order . Press the Start button Name yo...
Niño: Low Voltage Power Panel
Last Updated: July 28, 2026Installation Instructions Niño Low Voltage Power Panel is designed specifically for Custom Integrators to offer maximum flexibility for installation. It is a power distribution device offering up to 18 individual 12 Volt DC outputs for rack equipment, eliminating the need for the "wall-wart" power s...
Niño: RF Remote Programming – Standalone
Last Updated: July 28, 2026Setup Wake up your Shade Make sure the shade the shade is Awake buy pressing and holding the Motor Head Button for 1 jog Adjusting Limits Adjusting the Upper limit Move the shade to its current limit. Simultaneously press "Up" & "Stop" on the remote until the motor jogs once. Move the shade to the d...
Niño: Side Channels
Last Updated: July 28, 2026Use the pre-drilled holes, or use the pre-installed double-sided tape Using the pre-drilled holes Drill the holes inside the window frame and secure with screws. Using pre-installed 3M Tape Remove the protective layer from the 3M tape, and then attach to each side of the window frame. Installation -...
Niño: Wall Remote
Last Updated: July 28, 2026Features Mix & match shades on a 5-channel remote Multiple channels can be selected and controlled simultaneously Control multiple devices in the same channel Pairs directly with the shade • Limit-setting fully supported Securely flush mounts to a wall with or without a junction box Compatible with ...
