Solo 3
Solo 3: 375 Installation (External Mount)
Last Updated: July 28, 2026Before Proceeding WARNING: SI recommends conducting a visual inspection, to check the internal brackets, material roll, and electronics for any concealed shipping damage before proceeding with the screen installation. For best results, read the instructions in their entirety before proceeding with a...
Solo 3: 575/675 External Mount Installation
Last Updated: July 28, 2026Before Proceeding WARNING: SI recommends conducting a visual inspection, using either Method 1 or Method 2, to check the internal brackets, material roll, and electronics for any concealed shipping damage before proceeding with the screen installation. For best results, read the instructions in thei...
Solo 3: 575/675 Flush Mount Installation
Last Updated: July 28, 2026Before Proceeding WARNING: SI recommends conducting a visual inspection, to check the internal brackets, material roll, and electronics for any concealed shipping damage before proceeding with the screen installation. For best results, read the instructions in their entirety before proceeding with a...
Solo 3: Care, Servicing & Troubleshooting
Last Updated: July 28, 2026Operating and Care of Your Screen Operation of the screen systems should only be performed by responsible parties. Always check the path of the Solo 3 screen before operating to ensure that the path is clear of furniture or obstacles that could prevent full operation. Monitor the Solo 3 screen for s...
Solo 3: MOAB Setup & Integration
Last Updated: July 28, 2026MOAB Setup & Integration Connections and Pinouts Motor Connections: Bottom Connections: Dip Switches Tip: While looking at the dip switches, and the numbers upside-down, flipping the Dip Switch ON, would be flipping it UP, towards the Buttons/board. Programming Mode = ON, User Mode = OFF IR Sensor E...
